Use on surfaces from the sink to the bath tub. Specially designed to tackle soap scum, mould and urine on all surfaces from grouting to shower doors made of tempered glass, from ceramic toilets to mirrors and chrome.
Caution: Take care when using this fibre on Perspex or Plexiglass screens especially in hard water areas – this can lead to fine calcium deposits which have a sandpaper effect on the surface and can leave scratch-marks on the surface. In this case treat area with Calcium Dissolver beforehand (1 teaspoon per litre of water), rinse with water and dry using this fibre.
- Keep your bathroom clean by wiping wet areas immediately after bathing or showering with the dry glove.
- The mixed yellow side is not only ideal to dry after but also for a damp cleaning of dusty surfaces in the bathroom. Thanks to the special structure dust particles are lifted and trapped by the fibre.
- If cleaning with the white fibre is not enough (in very hard water areas), or when using this fibre for the first time, use the following procedure:
Mix 1 teaspoon of Calcium Dissolver with 1 litre of water and wipe over the areas with the white fibre. Rinse with lots of water and dry off with the fibre.
- In extreme cases diluted Calcium Dissolver can be left on the surfaces for a period of time to take effect. If necessary repeat the procedure.
- Use DRY to WET.